top of page

ENVIRO METALLICS

Metallic pigments can be added to Enviro Poxy™ and New Poxy® products to add a shimmering, iridescent finish to your surface.
For optimal results, be sure to check out the Pro Tips section
at the bottom of the page!

Innovative Epoxy Flooring, Marble Design, smooth clean finish

Innovative Epoxy Flooring

COLOURS

Enviro Metallics are available in a variety of colours that you can browse below. Please note that precise shades may vary slightly depending on your device. 

Black Metallic Board Application for Epoxy

Black Application

Blue Metallic Board Application for Epoxy

Blue Application

Brown Metallic Board Application for Epoxy

Brown Application

Black Metallic Pigment for Epoxy

Black Pigment

Blue Metallic Pigments for Epoxy

Blue Pigment

Brown Metallic Pigments for Epoxy

Brown Pigment

Copper Metallic Board Application for Epoxy

Copper Application

Gold Metallic Board Application for Epoxy

Gold Application

Green Metallic Board Application for Epoxy

Green Application

Copper Metallic Pigments for Epoxy

Copper Pigment

Gold Metallic Pigments for Epoxy

Gold Pigment

Green Metallic Pigments for Epoxy

Green Pigment

Red Metallic Board Application for Epoxy

Red Application

Silver Metallic Board Application for Epoxy

Silver Application

White Metallic Board Application for Epoxy

White Application

Red Metallic Pigments for Epoxy

Red Pigment

Silver Metallic Pigments for Epoxy

Silver Pigment

White Metallic Pigments for Epoxy

White Pigment

MIXED METALLICS GALLERY

Metallic pigments can be mixed with each other to achieve countless unique results. Click through the samples below!

SIZE

Enviro Metallics are available in 12oz jars.

​

​

ENVIRO METALLICS PRO TIPS

Follow these pro tips to ensure the best results!

MIXING & APPLICATION

  • Apply a base coat of solid colour Enviro Poxy™ or New Poxy® 

  • Mix metallic pigment(s) with PART A clear epoxy using a drill mixer 1 day before application

  • Mix until the pigment is dispersed then set aside

  • Do NOT mix PART B until you are ready to apply

  • Once ready to apply, mix PART B into PART A metallic mixture (drill mixer is not required)

  • Wear a N95 respirator and safety goggles

  • Two coat application is recommended

  • Once application is completely dry, a clear top coat is recommended to seal the coating

bottom of page