An advanced, environmentally friendly two component 100% solids epoxy coating system, containing no VOC’s (volatile organic compounds), no solvent, no water, and virtually no odour.
Enviro Poxy™ is designed to optimize functional and decorative properties with superior chemical resistance, mechanical strength, durability, and adhesion to protect from wear, chemical attack, stains, and mechanical stress while offering a beautiful porcelain-like high gloss finish.
Enviro Poxy™ is available in a wide range of standard and premium colours. Browse our range of colours below. Please note that precise shades may vary slightly depending on your device.
DRY TIMES & SIZES
Both our standard and premium colours are available in three dry times:
EP100 (20-24 hrs), EP300 (14-16 hrs), and EP400 (7-8 hrs)
Purchase our Enviro Poxy™ kits in four convenient sizes:
2L, 4L, 8L, 16L
Private labeling is available.
ENVIRO POXY™ PRO TIPS
Follow these pro tips to ensure the best results!
Ensure concrete has less than 5% moisture
Do NOT wash the floor; the surface MUST be dry
Grinding or sanding prior to application is recommended
Repair and/or patch cracks, divots, or damaged concrete
with our Enviro Poxy Patch or Fast Set Concrete Patch
Mix for 5 minutes with a hand paddle or 3 minutes
with a drill mixer
A drill mixer MUST be used for the 16L kits
Avoid creating air bubbles
Do NOT split kits
Begin application immediately after mixing
Product MUST be stored at room temperature
Scrape product from the side and bottom of pail
Do NOT turn the pail upside down to drain product
Apply 2 coats for optimal results
Tools required: brush, microfibre roller, squeegee,
and spike shoes (optional)
For more information, Product Data Sheets and Mixing Instruction PDFs are available for download.
Product Data Sheets
Our line of Enviro Poxy™ products
are CFIA approved