NEW POXY®
A two component 100% solids polyaspartic floor coating, containing no VOC’s (volatile organic compounds), no solvent, no water and virtually no odor. Next-generation urethane technology!
New Poxy® has been designed to provide the same superior functional and decorative properties
(high chemical resistance, mechanical strength, durability and adhesion) as our EP100 Enviro Poxy™ line, but now with the added benefits of being fast-setting and UV friendly. Protect your
concrete floors from the direct effects of chemicals, stains, and mechanical stress while offering a beautiful high gloss, UV friendly finish.
COLOURS
New Poxy® is available in a variety of colours that you can browse below. Please note that precise shades may vary slightly depending on your device.
DRY TIME & SIZES
Dry to the touch in as little as 1 - 2 hours.
Purchase our New Poxy® kits in four convenient sizes:
2L, 4L, 8L, 16L
Private labeling is available.
NEW POXY® PRO TIPS
Follow these pro tips to ensure the best results!
01
SURFACE PREP
-
Ensure concrete has less than 5% moisture
-
Do NOT wash the floor; the surface MUST be dry
-
Grinding or sanding prior to application is recommended
-
Repair and/or patch cracks, divots, or damaged concrete
with our Enviro Poxy Patch or Fast Set Concrete Patch
02
MIXING
-
Mix for 2 minutes with a hand paddle or 1 - 1.5 minutes
with a drill mixer -
A drill mixer MUST be used for the 16L kits
-
Avoid creating air bubbles
-
Do NOT split kits
-
Begin application immediately after mixing
03
APPLICATION
-
Product MUST be stored at room temperature
-
Scrape product from the side and bottom of pail
-
Do NOT turn the pail upside down to drain product
-
Apply 2 coats for optimal results
-
Tools required: brush, microfibre roller, squeegee,
and spike shoes (optional)
DOWNLOADS
For more information, Product Data Sheets and Mixing Instruction PDFs are available for download.
Product Data Sheets
English
French
Mixing Instructions
English
French
New Poxy® is CFIA approved